




- Up to 250 m2
- Calls : All UK Networks
- 3G : All UK Networks
- 4G : -
This repeater is certified for the 2 main frequencies and covers all 3G voice and data in the UK. This ensures all handsets that cover standard voice or 3G for the main networks Vodafone, O2 and its resellers like Lebara, Tesco mobile and giffgaff will have better signal.
What is needed to ensure it will work for me?
One thing and one thing only. You must have signal outside where you place the aerial. The stronger the signal the closer to the recommended coverage you will receive. For areas where outdoor signal is weak always go with the stronger booster coverage areas.
Is Installation Difficult?
One outdoor antenna, one cable to the repeater and plug it in and you will have full indoor coverage everywhere if its open plan. If you have loads of internal walls it reduces the coverage but signal will travel through plaster board and wooden floors. Mass concrete and foil/steel will block the signal.
1 x Outdoor Aerial Antenna
1 x PowerMAX 900/2100MHz Amplifier
1 x 10 meter Coaxial Cable
1 x Indoor Rubber Whip Aerial Rebroadcast Antenna
1 x AC/DC Power Supply
1 x Easy to follow Installation Manual
Item | Parameters |
Connector | N-Female as Standard |
Cooling | Heatsink convection cooling |
Environment Conditions | IP 40 |
Humidity | < 90% |
Operating Temperature | -10C - 60C |
Item | UpLink | DownLink |
900MHz Frequency 2100MHz Frequency |
880~915MHz 1920-1990MHz |
925~960MH 2110-2180MHz |
Gain | 29~50dB (±3dB) | 34~65dB (±3dB) |
Ripple in Band | ≦ 5dB | |
Coverage | 500 square meters | |
Power | 20 dBm | |
Spurious Emission (9KHz-1GHz) | ≦ -36dBm | |
Max Noise Figure | ≦ 6dB | |
Return Loss | ≦3dB | |
Time Delay | ≦ 0.5μs | |
MTBF | > 50000hours | |
Power Supply | AC100~240V 50~60Hz / DC12V 2A | |
Power Consumption | < 10 Watt | |
Impendence | 50 Ω |
This repeater is certified for the 2 main frequencies and covers all 3G voice and data in the UK. This ensures all handsets that cover standard voice or 3G for the main networks Vodafone, O2 and its resellers like Lebara, Tesco mobile and giffgaff will have better signal.
What is needed to ensure it will work for me?
One thing and one thing only. You must have signal outside where you place the aerial. The stronger the signal the closer to the recommended coverage you will receive. For areas where outdoor signal is weak always go with the stronger booster coverage areas.
Is Installation Difficult?
One outdoor antenna, one cable to the repeater and plug it in and you will have full indoor coverage everywhere if its open plan. If you have loads of internal walls it reduces the coverage but signal will travel through plaster board and wooden floors. Mass concrete and foil/steel will block the signal.
Item | Parameters |
Connector | N-Female as Standard |
Cooling | Heatsink convection cooling |
Environment Conditions | IP 40 |
Humidity | < 90% |
Operating Temperature | -10C - 60C |
Item | UpLink | DownLink |
900MHz Frequency 2100MHz Frequency |
880~915MHz 1920-1990MHz |
925~960MH 2110-2180MHz |
Gain | 29~50dB (±3dB) | 34~65dB (±3dB) |
Ripple in Band | ≦ 5dB | |
Coverage | 500 square meters | |
Power | 20 dBm | |
Spurious Emission (9KHz-1GHz) | ≦ -36dBm | |
Max Noise Figure | ≦ 6dB | |
Return Loss | ≦3dB | |
Time Delay | ≦ 0.5μs | |
MTBF | > 50000hours | |
Power Supply | AC100~240V 50~60Hz / DC12V 2A | |
Power Consumption | < 10 Watt | |
Impendence | 50 Ω |
1 x Outdoor Aerial Antenna
1 x PowerMAX 900/2100MHz Amplifier
1 x 10 meter Coaxial Cable
1 x Indoor Rubber Whip Aerial Rebroadcast Antenna
1 x AC/DC Power Supply
1 x Easy to follow Installation Manual